• From -1 … + 1000 bar
• From -1 … +1 mbar and from -10 … +10 mbar
• From 800 … 1200 mbar abs. and from 0.05 … 16 bar abs.
• Using high accuracy reference standards (Dead Weigh Tester, DWT) and working standards (Standard electronic pressure gauges and pressure controllers) with accuracy ranging from 0.008 % … 0.025 %
• Pursuant to the guidelines DIN EN 837, DAkkS-DKD-R 6-1, EURAMET cg-3 or EURAMET cg-17

• All instruments measuring negative and positive pressure, differential pressure-including the differential pressure under static pressure and absolute pressure
• Analogue pressure gauges
• Electrical pressure transmitters and pressure sensors
• Analogue differential pressure gauges
• Pressure switches
• Meters of fluid column / U-tube pressure gauges
• Inclined pressure gauges
• Pressure calibrators
• Pressure controllers
• Pressure recording instruments
• Absolute and barometric pressure gauges
• Differential pressure sensors

• From 1 mg to 300 kg using standard weights
• From 300 kg to 2000 kg using standard weights and additional weights
• With an accuracy of 5.3 μg
• According to the Euramet CG Directive 18

• Analytical weight machines
• High precision weight machines
• Moisture determination scales
• Production scales
• Pallet truck scales
• Film scales

• Ranging from -80 … +1000 °C
• Ranging from -80 … +250 °C (chambers)
• In calibration baths, dry block calibrators and environmental chambers, using the most appropriate standard thermometers
• With accuracy from 5 mK … 1.5 K
• In accordance with the guidelines DKD/DAkkS and EURAMET

• Temperature sensors with transmitters
• Thermoresistances (Pt100, Pt1000 etc.))
• Thermocouples (type ‘K’, ‘J’ etc.)
• Temperature readers, hand-held gauges, temperature recording devices etc
• Different types of sensors such as immersion sensors, surface sensors and air temperature measurement sensors
• Test thermometers
• Mechanical thermometers
• Dry block calibrators
• Temperature calibrators
• Optical thermometers
• Calibration baths
• Incubation cabinets
• Sterilization chambers
• Environmental chambers

• From 15 … 95 % rH (at 25 or/and 40 οC)
• In environmental chambers of changing conditions, fixed and portable
• With accuracy ranging from 1 % rH
• In accordance with guidelines DKD/DAkkS and EURAMET

• Humidity sensors with transmitters
• Humidity readers, hand-held gauges, humidity recording devices etc
• Hair-tension humidity meters
• Mechanical humidity meters

• From 10 μL… 20 mL (Automatic piston pipettes – Pipettes of fixed or variable volume)
• From 100 μL to 10 lt (Volumetric equipment and liquid dispensers)
• Using state of the art weighing systems
• Accuracy from 0.2 μL
• According to the instructions DKD / DAkkS and EURAMET

• Direct Current in the range of 0… 50 mA
• DC voltage in the range of 0 … 20 V
• DC resistance in the range of 0 … 10 kΩ

• Vernier calipers-digital/Micrometers/Metal sheet thickness in the range of 0,5 … 1000 mm
• Rulers/Measuring tapes in the range of
• Paint thickness gauge in the range of 12,5 … 500 μm

To achieve the minimum possible impact on your manufacturing process and to save time, we offer you on-site calibrations – and by accredited methods in accordance with DIN EN ISO / IEC 17025 – anywhere in Greece, for measuring instrument of mass, pressure, temperature, and humidity.

• In scales from 1 mg to 2000 kg
• In pressure ranging from -0,95 … +1000 bar with accuracy from 0,025 %
• In temperature ranging from -30 … +650 °C with accuracy from 0,08 Κ
• In humidity from 15 … 95 % rH (at 25 or/and 40 οC) with accuracy ranging from 1,0 % rH

The calibration complies with the guidelines in force. The measurement results are documented in a calibration certificate and the calibrated meter is labeled with a calibration mark. Depending on your demands, you may opt for either a calibration by an accredited method or a calibration equivalent to the factory calibration.

Certificate sample